Event-triggered Control for Linear Systems with Model Uncertainty and Clock Offset

International Journal of Control, Automation and Systems - This paper investigates the input-to-state stability (ISS) of continuous-time networked control systems with model uncertainty and bounded...     

Physicochemical,textural and volatile characteristics of fermented milk co-cultured with Streptococcus thermophilus,Bifidobacterium animalis or Lactobacillus plantarum

Fermented milks were prepared with various culture combinations of Lactobacillus plantarum or Bifidobacterium animalis with Streptococcus thermophilus, and the impact of microbes combinations on acidification, proteolysis, lipolysis, texture, volatiles and sensory quality of fermented milk was investigated during 21-day storage at 4 °C. The results showed that products from the co-cultures displayed higher titratable acidity, more peptides, higher proteolytic activity and lipolysis capacity compared with that from the pure strains of S. thermophilus. When L. plantarum and B. animalis combined in a ratio of 2:1 with S. thermophilus, the products maintained relatively more viable cell counts of the 3 strains, strong proteolysis ability and lipolysis capacity during the storage. Milk fermented by co-cultures of the 3 strains exhibited higher cohesiveness, more volatiles and better sensory quality compared with these fermented by S. thermophilus only or in co-cultures with either B. animalis or L. plantarum based on principal component analysis.     

Microstructure evolution of Ti5Si3 in Cu-Ti-Si alloys

The Cu-Ti-Si alloys containing in-situ formed Ti_5Si_3 are prepared.In order to clarify the Ti_5Si_3 formation processes and its microstructure characteristics,the as-cast and deeply etched Cu-Ti-Si alloys with different compositions and cooling rates were investigated using scanning electron microscopy (SEM),transmission electron microscopy (TEM) and X-ray diffraction (XRD).It is found that the eutectic Ti_5Si_3 phases in Cu-Ti-Si alloys are rod-like with hexagonal cross section which tend to intertwine with each other to form a firm skeleton like a bird nest structure which can make the alloys keep their original shape even after etching off the Cu matrix.In addition,there is Cu in the center of many Ti_5Si_3 rods,resulting in a core-shell structure.With the increase of the cooling rate,Ti_5Si_3 distributes more uniformly,and the diameter of Ti_5Si_3 significantly decreases,with a minimum size of less than 100 nm,while the aspect ratio of Ti_5Si_3 increases.     

高性能计算分析技术在大型钠冷快堆屏蔽设计中的应用

钠冷快堆堆容器是一体化的池式结构，由众多堆内构件组成且结构复杂，堆芯到生物屏蔽外中子输运过程中各向异性明显且深穿透问题严重，大尺度范围下三维S_N方法计算是制约快堆屏蔽设计的瓶颈。通过将三维SN程序与高性能计算技术相结合，采用并行计算方法可解决快堆堆本体内各向异性的三维深穿透屏蔽问题。本文以中国示范快堆（CFR600）堆本体为研究对象，采用JSNT-CFR程序详细计算了堆本体内的中子注量率、光子注量率、剂量率，并将计算结果与已有的二维程序设计结果进行比较。结果表明，将传统屏蔽计算方法与高性能计算相结合，能满足CFR600堆本体屏蔽计算精度要求，获得更为全面的三维展示效果，在计算模型复杂、粒子穿透深度等复杂问题的屏蔽计算上具有较明显的优势，为大型钠冷快堆屏蔽设计提供有力支撑。     

基于安全围壁的浮动堆旁路泄漏设计研究

基于陆上核电厂二次安全壳的概念，引入了浮动堆安全围壁的构想，提出了“安全壳+安全壳围壁+堆舱”的放射性包容模式。研究了评价安全围壁的旁路泄漏设计思路，提出识别旁路泄漏途径和确定旁路泄漏率的方法。给出了安全围壁负压的设计依据，为后期浮动堆通风系统的设计提供参考。      

基于加权法的砾类土含水率检测

砾类土在工程建设中有着广泛的应用,其含水率是一项非常重要的指标,但现有测试方法耗时较长。以砂砾石料的砾类土为试验对象,基于加权法思想,将饱和面干含水率替代法和虚拟比重法进行结合,开展砾类土含水率快速检测方法的研究,并对现有的饱和面干含水率测定操作进行一定的改进和优化。采用多种数学方法(绝对误差、均方偏差平方和,相关曲线的相关系数和F显著性检验分析法)对加权法和烘干法的结果进行对比分析。通过试验统计数据分析,证实加权法与烘干法的测定结果基本一致。该分析结果为现场土料含水率快速测定提供了一种新的思路和手段。     

Ti70合金板的组织与力学性能的各向异性

通过拉伸及低温冲击试验、光学显微镜、扫描电镜及X射线衍射仪,对Ti70合金板的组织与力学性能的各向异性进行了研究。结果表明,Ti70合金板热轧及退火后组织未出现明显差异,退火过程中主要以回复为主,但在高密度位错的剪切带上出现了一定数量的再结晶晶粒。退火态Ti70合金板横向屈服强度及低温冲击吸收能量都高于纵向,但抗拉强度低于纵向,表现出了明显的各向异性。退火后Ti70合金板形成了较强的{0002}基面织构,其晶面法向向RD方向(纵向)偏转±30°,向TD(横向)方向偏转±41°。由于基面织构更向RD方向集中,因此造成了Ti70合金板力学性能的各向异性。     

基于学习进程的学习评估在大学化学教学中的实践

高等教育质量提升的关键在于课程教学质量的不断完善。作为高等教育的重要环节,化学课程教学在非化学化工专业人才的知识体系构建、能力培养、素质养成方面有着不可或缺的作用。大学化学课程的教学实践表明,基于学习进程的评估有利于激发学生的学习积极性,显著提高教学班的整体成绩并实现课程教学质量的提升。     

Heavy Water Additive in Formamidinium: A Novel Approach to Enhance Perovskite Solar Cell Efficiency

Heavy water or deuterium oxide (D₂O) comprises deuterium, a hydrogen isotope twice the mass of hydrogen. Contrary to the disadvantages of deuterated perovskites, such as shorter recombination lifetimes and lower/invariant efficiencies, the serendipitous effect of D₂O as a beneficial solvent additive for enhancing the power conversion efficiency (PCE) of triple-A cation (cesium (Cs)/methylammonium (MA)/formaminidium (FA)) perovskite solar cells from ≈19.2% (reference) to 20.8% (using 1 vol% D₂O) with higher stability is reported. Ultrafast optical spectroscopy confirms passivation of trap states, increased carrier recombination lifetimes, and enhanced charge carrier diffusion lengths in the deuterated samples. Fourier transform infrared spectroscopy and solid-state NMR spectroscopy validate the N–H₂ group as the preferential isotope exchange site. Furthermore, the NMR results reveal the induced alteration of the FA to MA ratio due to deuteration causes a widespread alteration to several dynamic processes that influence the photophysical properties. First-principles density functional theory calculations reveal a decrease in PbI₆ phonon frequencies in the deuterated perovskite lattice. This stabilizes the PbI₆ structures and weakens the electron–LO phonon (Fröhlich) coupling, yielding higher electron mobility. Importantly, these findings demonstrate that selective isotope exchange potentially opens new opportunities for tuning perovskite optoelectronic properties.